Innokin Ares 2 D22/D24 MTL RTA 2ml/4ml

• Brand: Innokin
• Unit: set
• Type: RTA(Rebuildable Tank Atomizer)
  
• Net Weight: 80(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Product introduction

Innokin Ares 2 MTL RTA has some improvements based on Innokin Ares MTL RTA. Ares 2 is available in 24mm and 22mm diameter versions, Ares 2 D24 RTA, and Ares 2 D22 RTA, the capacity is 4ml (D24) and 2ml (D22). Ares 2 improves the seals on the top and bottom of the nebulizer to prevent liquid and air leakage, thereby ensuring tighter pull. Another improvement is the addition of a 0.8mm hole for further tightening. The top cover can be removed so that the user can replace the silicone seal of the filler port, and the stopper teeth appear on the main airflow controller so that the airflow can be selected more accurately. A simple pressure on the top cover will cause it to slide for liquid filling. For all MTL loves, the Ares 2 RTA equipped with a build deck can only accommodate one coil! When firmly secured, the latter is enclosed in a small atomizing chamber to prevent loss of taste. Ares 2 MTL RTA can provide more vape requirements through the simple rotation of the beautifully carved airflow ring. The most important change is the Cross Air Flow Control located under the resistance. Offer the possibility of optimizing the airflow under the resistance without having to change the inserts or remove the resistance to make adjustments. This new design is the first of its kind. Innokin Ares 2 RTA is a balance between features, ease of use, and vape quality.

Parameters

Diameter: 22mm(D22) / 24mm(D24)

Capacity: 2ml(D22) / 4ml(D24)

Filling: Push and slide to open and fill

Build Deck: single coil build deck

Airflow: Bottom Airflow and cross airflow control

Drip tip: 510 Drip tip

Color: Black, Stainless Steel

Innokin Ares 2 D22/D24 MTL RTA 2ml/4ml comes with

1 x Innokin Ares 2 D22 RTA 2ml/Innokin Ares 2 D24 4ml 

1 x Silicone ring

1 x Japanese Organic Cotton

1 x Pre-Built 1.0ohm Kanthal Coils

1 x 1M 26G Kanthal Wire

1 x Spare O-rings

1 x Non-Locking Curved Mouthpiece

1 x Replacement Smoked Glass Tube

1 x Replacement Silicon Fill Port

1 x Replacement Flat Screws

1 x Dual Use Screwdriver

1 x Phil's Build Tool

1 x Dimi's Build Tool

Features

1. The new Cross Air Flow Control (CAFC) located under the coil;

2. Improved the top cap and seals to prevent liquid and air seepage;

3. Able to remove the top cap and replace the silicone top-fill seal;

4. Improved the bottom seals and added an 0.8mm airhole allowing for a tighter MTL selection;

5. Detents for the bottom airflow selector to allow for easier and more accurate settings;

6. Same flavor bell, same easy drop-in coil deck and liquid barriers for excellent vaping

GUARANTEE

3 Months for Battery/ Mod. Atomizer & Accessories are DOA (Dead On Arrival), please contact us within 72 hours of delivery.

ORDERING TIPS

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.